Have Yourself a Lawn Fawn Christmas

Hello everyone!  Hope you are off to a great Monday.  Today I wanted to share with you a fun project I made for Chibitronics using some wonderful goodies from Lawn Fawn.  (we are hopping with them this week, be sure and check out their chibi projects as well).

Supplies Used:

• Chibitronics Copper Tape
• Chibitronics LED Light Stickers
• Chibitronics Twinkle Effect Sticker
• Lawn Fawn Cheery Christmas Stamps
• Lawn Fawn Cheery Christmas Dies
• Lawn Fawn Small Dotted Square Stackables
• Lawn Fawn Perfectly Plaid Petite Paper
• Colored Pencils
• Cardstock Card Base
• Glitter Cardstock
• Stickles
• Foam Tape

Step 1:  

Cut plaid paper to 3.75x5 inches and using Dotted Square Stackable cut window.  I used the second largest square.  Save the inside window piece we will use it later.  Attach to card base.

Step 2:

Again, using the same square stackable, cut glitter cardstock for inside the window.

Step 3:

Stamp desired images onto white cardstock.  I like to stamp a few extras, just in case.

Step 4:

Die cut and color selected images.  I added stickles to the Christmas lights for added interest and sparkle.

Step 5:

Flip over the plaid inside window we cut earlier and free hand a snow bank and attach to glittered window we cut in step 2.  Assemble die cut and colored stamps where desired and using foam squares attach to snow bank background.

Step 6:  

Poke hole in card where you want light to shine through.  This is where we will place the star later. Place winter scene onto card base and use a pen or pencil to mark on card base where the light should be.

Step 7:  

Create circuit.  There are lots of great tutorials on the Chibitronics page for how to use different stickers.  You can find them here.  But this is what my circuit looks like when complete.  As usual, I have added a small strip of paper to keep my circuit from being complete until the paper is removed. This "switch" allows me to mail off the card without worry of the battery dying in transit.

Step 8:  

Place winter scene onto card base using foam tape. to allow for the battery and sticker depth.

This card was so much fun to make, and I love the way it twinkles.

Hugs.

Nancy

Avery Elle and Chibitronics

Hey everyone!  Welcome to the Chibitronics/Avery Elle blog hop.  I am so thrilled to share with you a couple of projects I made using their amazing stamps, dies, inkpads, and patterned paper. Goodness, Avery Elle has it all.   Not familiar with Avery Elle? well, Avery Elle is a small corporation located in Southern California. They launched their first set of whimsical stamps in June 2012 and have now expanded into stamps, dies, and color coordinating pigment ink pads, patterned paper pads, twine and A2 top folding note cards. Avery Elle stamps, dies, and paper are all proudly made right here in the USA.

Ok, well now for the fun stuff.  Much like many of you, I sent one of my lovelies off to college this year.  She had been a bit down in the dumps, a little homesick, moving 3000 miles away is hard for both of us.  I was sending her a care package (yes I know she had only been gone a week) and decided to make this fun light up card to light up her day. (insert apology, it got a bit crushed in the box...eek)

How cute are those little fairies, and the papers are so fun...but I think her favorite part was the way it lights up.

Supplies Used:

• Chibitronics LED Circuit Stickers Starter Set
• Chibitronics Tropical LED Lights
• Avery Elle Pixie Dust Clear Stamps
• Avery Elle Pixie Dust Ellements
• Avery Elle Brights Collection Paper Pad
• Avery Elle New Moon Pigment Ink Pad
• White Cardstock
• Kraft Cardstock
• Favorite Medium for Coloring
• Foam Dots
• Sizzix Machine

Step 1:  Stamp with pigment ink onto white cardstock and color.  I used Copic markers for my card

Step 2:  Die cut images from white cardstock.  The Avery Elle Ellements are so much easier than fussy cutting.

Step 3:  Determine layout of design elements.  This step allows you to determine where you want the lights to go.

Step 4:  Make holes in top layer for lights to shine through and mark light placement onto white cardstock base for reference.

Step 5:  Use copper tape from Chibitronics to create parallel circuit.  Make sure and mark your positive and negative tapes for battery placement.

Step 6:  Insert battery and check that circuit is properly functioning.

Step 7:  Since I was going to be mailing the card and didn't want the battery to die, I inserted a simple switch (piece of paper) between the battery and the copper tape.  Once the piece of paper is removed the circuit is complete and the card will light up.  This step is totally unnecessary if you are giving your card immediately, but I would hated to have the card arrive without the lights.  LED lights last forever and the batteries last a good time as well, but better safe than sorry.

Step 8:  At that point it was just a matter of assembling the card.  I used lots of foam dots to give the card dimension and allow for room of the battery and lights.

And that's it.  Super fun, super cute, and I know she will sparkle brightly in her new adventure.

Oh, and because Avery Elle was so generous I also had the goodies to make this holiday card using the same basic techniques.  How cute is Rudolph's nose?

Thanks for dropping by,

Hugs
 

Chibitronics Meets My Favorite Things

Hey everyone!  Long time, huh.

Well, recently I received a yummy box of goodies from My Favorite Things for a blog hop with Chibitronics.  Of course I had to come up with a few "Thank You" cards for swim team.  Don't forget to check out all the gorgeous goodies the MFT girls made on the My Favorite Things Blog

Sparkle Card Supplies :

• Chibitronics Copper Foil Tape
• Chibitronics Tropical Color LED Circuit Stickers
• My Favorite Things DC You Were Meant to Sparkle Stamps
• My Favorite Things Black Licorice Hybrid Ink Pad
• My Favorite Things Prestige Cardstock Sampler
• My Favorite Things Plaid Patterns Paper Pack
• Dazzling Metallic Sequins

Step 1:  Cut cardstock to size and add layer of patterned paper.

Step 2:  Stamp sentiment onto white cardstock using hybrid ink and stamp.

Step 3:  Create the circuit using copper tape and LED light stickers on an extra sheet of paper or cardstock.  You can see more information and directions on the Chibitronics website here.  I used three different colors of lights to give the card a bit more sparkle.

Step 4:  Complete the circuit by adding copper tape to the back of the stamped sentiment.

Step 5:  Embellish design with additional sequins.

This switch is super fun to use, just run your finger over the bottom of the card and the lights sparkle.

You Deserve a Treat Supplies:

• Chibitronics Copper Foil Tape
• Chibitronics White LED Circuit Stickers
• My Favorite Things Prestige Cardstock Sampler
• My Favorite Things Homespun Gingham Paper Pack
• My Favorite Things Black Licorice Hybrid Ink Pad
• Die-Namics LLD Hot Cocoa Cups
• My Favorite Things LLD Stay Cool Stamps
• Sizzix Machine
• Core'dinations Vellum

Step 1:  Assemble Card Base

Step 2:  Stamp Sentiment onto layered papers.

Step 3:  Die cut white cardstock mug and vellum steam and coffee.   I used my trusty Sizzix Machine and some Core'dinations gold vellum.

Step 4:  Assemble simple circuit behind where the steam will be placed. 

Step 5:  To prevent the card from lighting before being presented, I added a small piece of cardstock between the tape and the battery.  Once presented, the recipient can pull the cardstock out completing the circuit. 

This is a simple way to prevent the battery from running out before the card is presented.  

A Jukebox that Lights up With Chibitronics

Hello Again!!!  More today from the Chibitronics booth at CHA featuring the projects I made using the SVGCuts Rockin and Rollin SVG Kit and my Cricut.

Today I wanted to share with you one of my absolute favorite projects I made for the booth.  This little light up Jukebox.

 

To create the box I used lots of Core'dinations papers.  I love the color core and how it reacts when embossed.  Almost like real wood on my box, yeah?  And, check out the metallic papers also from Core'dinations oh and the colored vellum.  I love the variety of papers the Core'dinations offers.

From there, I created my circuits adding light on the back panel of the 3D project where they would best shine through to the front.

Continuing the circuits onto the back of the project so as to be able to switch out the battery.

Love the way the projects lights up.  So super fun.

Hugs.